Additional grab loops are a great way to customize your boat for specialized packing options, like carrying bikes or adding a stern grab line. We also offer DIY D-Rings and DIY Strap Plates depending on your preferences.

• Grab Loop: A 3/4-inch nylon webbing loop bar tacked to a 3-inch diameter base.
• Toggle Loop: The Toggle Loop is the connection point needed for some seats, foot braces and accessories. It is the same base and webbing as the Grab Loop, but with an oval sliplok in the webbing. A 3/4" D-Ring will slip over the toggle for quick removable attachment point. 
• D-Ring Loop (Not Shown): The D-Ring Loop features a heavy duty 4-inch diameter 1050d fabric base, with a 1-inch nylon webbing loop and 1-inch aluminum d-ring. This attachment point was used on many years of the Forager.
  

Note: These items must be glued in place with a quality TPU compatible adhesive. As with all DIY install parts, Alpacka does not provide instructions on item placement on your boat or the adhesive process.  Attachment locations are personal preference and the adhesive process depends on the adhesive being used. If you are not comfortable performing the work yourself, we provide a complete range of retrofit, repair and upgrade services through our service department.